|
MISCELLANEOUS
LUBRICANTS
This is a premium assembly lube with MoS2 used in
assembling engines. Through our testing, we have found this assembly lube to have a
very high
load carrying ability that provides a superior film barrier on bearings, cam and
crankshafts, gears, pushrods and lifters when used during assembly.
It greatly
protects new engines under startup conditions.
Engine Assembly Lube
TA 1529 2 oz Tube
FIBERGLASS SPOILERS
Fiberglass reproductions of the original Buick
dealer installed option. Available in front spoiler for 1970-72 GSX/GS, and rear
spoilers for
1968-69 GS/Skylark and 1970-72 GSX/GS.
TA 2016 Front Spoiler `70-`72
GSX/GS/Skylark
TA 2017 Rear Spoiler `68-`69
GS/Skylark
TA 2018 Rear Spoiler `70-`72
GSX/GS/Skylark
Installation and Preparation Instructions
Click the Question Mark!
TILTON SUPER STARTER
These super starters are of a full ball bearing construction not affected by most hot
or cold conditions. A low (250 amp) current draw allows
more spark for firing the
motor. The 3.75:1 gear reduction Super Starter produces 50% more torque than OEM
starters. It is less than 2/3 the
size of OEM starters with a total weight of
approximately 10.5 lbs as opposed to 17 lbs for OEM starters. Because if this, more
header, pan and
frame clearance is easily obtained. All electrical connections are siliconed and the armature is epoxy encapsulated for increased vibration resistance
and
dependability. Gaskets and seals are found throughout for moisture resistance.
Super Starters are plated and painted to look as good as they
perform.
TA 2021
V6-350
TA 2021-455
400-430-455
TA BUICK MINI
STARTER
GM produced, high torque miniaturized version of the
original starter, gives improved header
clearance and less chance of heat soak, as well as
reduced weight and ease of installation.
Brand New Not Re-built,
includes mounting bolts, and instructions.
TA 2022
Fits 231-252 V6, 350, 400-430-455
SOLID CARBIDE BURS
TA stocks the very hard to find 6" shank carbide burs used for head
porting and de-bur work. Also available in standard 3" shank. The
1/2"
size oval, flame and cylinder with radius end shapes are the most popular.
Specify shape, size, ferrous or non-ferrous and length when ordering.
See
Chart for part numbers. Burs are also available in 3/8" diameter upon request.
FRAME MOUNT PADS
1968-1972 A-body
1976-1987 Regal
and other Transplants
Reproduced by TA Performance and made out of 356-T6 cast aluminum, or cast
iron. Use to transplant a 400-430-455 into a `68-`72 GS/Skylark
or `76-`87 Regal.
Cast Aluminum pads save 4 lbs over the cast iron. Hardware Kit available,
includes all necessary mounting bolts and fram pad to
motor mount bolts, plus necessary
washers and nuts, all hardware is grade 8 for superior strength and corrosion resistance.
Note: Engine Mount Kits include Frame Pads and Motor Mounts.
TA 1820
Hardware kit
TA 1820A 1968-`72 Skylark/GS; 1976-`87 - Cast Aluminum
TA 1820B 1968-`72 Skylark/GS; 1976-`87 - Cast Iron
TA 1820CA 1968-`72 Engine Mount Kit, Cast Aluminum
TA
1820CC 1968-`72 Engine Mount Kit, Cast Iron
1964-1967 Skylark/GS
* For transplanting 400-430-455 engines in 1964-1967 A-body cars such as
Skylark/GS.
* Fully CNC machined.
* Available in 356 T6 Cast Aluminum, or Cast Iron.
* Designed to Accept conventional motor mounts.
* Raises engine 1/8th inch for additional header clearance.
* Optional dual bolt pattern allows for positioning of the engine rearward an additional
1/2" for even greater header clearance.
* Additional gusseting for increased strength have been added.
* No modification or clearancing of motor mounts is necessary, trimming of the motor mount
safety tabs is not required
TA 1820
Hardware kit
TA
1820CD 1964-`67 Engine Mount Kit, Cast Aluminum
TA
1820CE 1964-`67 Engine Mount Kit, Cast Iron
TA
1820D
1964-`67 Frame Pad, Cast Aluminum
TA
1820E
1964-`67 Frame Pad, Cast Iron
TRANSMISSION AND RUBBER MOTOR
MOUNTS
Replacement stock rubber motor mounts for 400-430-455 engines from
1968-1976, fits all. Also available for 1968-80 Buick 350 engines.
TA 1821
350
TA 1822 400-430-455
Transmission mounts for the standard turbo 350 and 400 transmissions.
1964-`75
TA 1823
Turbo 400
TA 1824 Turbo 350 ro 3 or 4 spd manual
SFI FLEX PLATE SHIELD / MIDMOUNT
 The ultimate in safety and a first of it's kind! Recommended for all forms of
racing and street performance. This shield
is unique because of it's 360°
containment, and most important because it fits inside the bell housing, sandwiched
between the engine and the transmission. Because of the safety minded design, the
flex plate fragments will be contained
before they have a chance to exit the bell housing.
At the same time, it functions as a mid mount, giving extra support
and protection
to the engine and transmission.
TA 2050
Fits 225-231-252 V6, 215-300-340-350,
400-430-455
ENGINE ENAMEL
Matches Original Buick Red
or Buick Green to emphasize
your Buick engine. Available in 11 oz. spray cans.
TA 1840
Buick Red (resists up to 300º)
TA 1841 Buick Green
(resists up to 300º)
TA 1842
Gloss Black (resists up to 500º)
TA 1843
Clear (resists up to 500º)
SERVICE
MANUALS
1967-1968-1969-1970-1971-1972
   
TA 3067
1967
Buick Service Manual, All Models, Licensed Reproduction
TA 3068
1968 Buick Service Manual, All Models, Licensed
Reproduction
TA 3069
1969
Buick Service Manual, All Models, Licensed Reproduction
TA 3070
1970
Buick Service Manual, All Models, Licensed Reproduction
TA 3071
1971
Buick Service Manual, All Models, Licensed Reproduction
TA 3072
1972
Buick Service Manual, All Models, Licensed Reproduction
 
TA PERFORMANCE T-SHIRTS AND HATS
T-shirts are a high quality construction
made from easy care 100% cool
cotton. Our traditional TA Performance Shirts are
Black with white and red TA Logo over left
chest and across the back,
and are available in men's
sizes small through XX-large. "Got
Torque?" T-shirts are made from the same fine shirts as our traditional
shirt but
are available on a white or black shirt and are available in men's
sizes medium through XX-large.
Our NEW ball caps are made by Imperial
Headwear, one of leading cap companies in the country. This is the
same type of hat that you will see in the best Golf Pro
Shops for $25 or
more. We sell our great looking hat for a fraction of the price. Raised
metallic effect embroidery really stands out. One size fits all.
TA 1914
Ball cap TA Logo (black or
putty)
TA 1915 Men's T-shirt TA Logos (specify size) black
TA 1916 Men's T-shirt "Got Torque?" (specify size)
black or white
REAR END GEARS
MORE TO COME!!!
| 
BURCSR3